Chris carried out detailed preparation work on our 1953 Aston Martin DB2/4. He began by cleaning the door frame, painting the back of the door skin and the frame itself, and then carefully refitting the assembly onto the car. With the car fully blocked down using 320-grit paper, Chris continued by readying it for the […]
Various parts of our 1953 Aston Martin DB2/4 have been in the Bridge Classic Cars paint shop. They have been painted black in preparation to be fitted back on the car.
Mauro applied epoxy primer to the floor panels and gearbox tunnel of our 1953 Aston Martin DB2/4, followed by a coat of direct-to-metal satin black paint to provide a durable and protective finish.
Our paint and body team are always busy here at the Bridge Classic Cars Suffolk HQ, especially this week with the the addition of two new projects for the team to get to work on. Joining the Aston Martin DB2/4 Drophead Coupe are another pair of Aston Martins. A 1953 DB2/4 Coupe and our 1969 […]
The doors and sills of our 1953 Aston Martin DB2/4 have had epoxy primer applied.
New front sills have been fabricated for our 1955 Aston Martin DB2/4 Drophead Coupe.
The engine and gearbox of our 1953 Aston Martin DB2/4 are now back in the car. It’s milestones like this that are always a good sign that the restoration of this rare and beautiful car is making good progress. It’s also now becoming a bit easier to imagine it back out on the road in […]
The engine and gearbox of our very rare 1953 Aston Martin DB2/4 are now complete and are ready to go back in the car when the time comes. Chris has applied epoxy primer and painted the inside of the bonnet too. This had to be done now as, when the bonnet frame goes back into […]
The engine and gear box of our 1953 Aston Martin DB2/4 is now back at the Bridge Classic Cars workshop and will soon be reunited with the car.
Here’s a closer look at the pistons for our 1953 Aston Martin DB2/4. This design focuses on optimisation for strength as shown by the detailed internal structure.
Various parts of our 1953 Aston Martin DB2/4 have been prepared for sandblasting. This is an important step in the restoration of this rare car and we are very excited to see the results back on the car. There has also been progress made on the engine and gearbox.
Here are Steve’s notes relating to his work on our 1953 Aston Martin DB2/4:
The new fuel pickup for our 1953 Aston Martin DB2/4 fits other models so has longer pipes than needed. Steve has modified it so it now fits the tank on our car.
Paintshop manager Chris has been prepping the interior and exterior of the body of our 1953 Aston Martin DB2/4 ready for epoxy primer and paint.
Recently, we have started to refit the suspension and steering, and some brake components that have either been new parts or refurbished original parts that we have overhauled to our 1953 Aston Martin DB2/4.
Clinton has been repairing the driver’s side rear wheel tubs on our 1953 Aston Martin DB2/4
The front suspension crossmember of our 1953 Aston Martin DB2/4 has been stripped and overhauled. New bearings and seals were fitted to the main part, then the steering idler was stripped and new parts fitted. Now it has been masked up for a clear coat with the other aluminium parts, this will stop any future […]
The chassis of our 1953 Aston Martin DB2/4 is back from powder coating so some small new parts have been refitted. The front suspension components have been painted, and new bushes, parts and bearings fitted ready for attaching. We are waiting for the rear axle to be completed, but in the mean time have been […]
Our 1953 Aston Martin DB2/4 has made more progress in its restoration recently. Chris has painted the brake drums in satin dtm and the carbs have been finished too.
Our 1953 Aston Martin DB2/4 has continued its stay in the fabrication bay here at Bridge Classic Cars. Clinton has fabricated two rear inner wings and removed the old rear inner wheel tubs and fabricated two new panels. Chris has also painted some of the car’s components in DTM satin.
James has stripped the front suspension and hub parts of our 1953 Aston Martin DB2/4 ready for painting. Some of the bolts and pins were seized and had to be drilled out to release them. Once the parts are prepped and cleaned, new bushes and bearings can be fitted ready for reassembly.
Parts of our 1953 Aston Martin DB2/4 have been in the paint shop with technician Mauro where he has been painting them black. While Mauro was doing this, Clinton was fabricating new parts and repairing the driver’s side front sill.
Classic Car Technician Neil has been prepping the chassis of our 1953 Aston Martin DB2/4. Alongside this, Clinton has been pulling dents out of the car and repairing them. Once the chassis was fully prepped, Tony took it to be powder coated.
Our 1953 Aston Martin DB2/4 has arrived back at our Suffolk HQ following its appointment with the media blasters. The body was carefully removed from the chassis of the 1950’s GT previously by our workshop technicians and carefully transported to a local blasting company to carefully remove the Claret paint as well as exposing any […]
Christian has had our 1953 Aston Martin DB2/4 in the fabrication bay as he has been making some repairs on the chassis. While he was doing this, many of the parts are now being stripped, cleaned and checked ready for painting. New bushes and other small parts have been ordered, and when the parts have […]
Last week, James started to strip the running gear down of our 1953 Aston Martin DB2/4 for refurbishment. The axles have been broken down into component parts ready for blasting/cleaning and then painting, any worn or damaged parts have been located and will be replaced on re-assembly. The brake and clutch pedal unit has also […]
The last sections of our 1953 Aston Martin DB2/4 have been removed, the radiators and other engine ancillaries, the engine and gearbox removed, then the chassis and bulkhead were completely stripped of suspension, steering and brake components, along with wiring loom and pipes/fittings. The chassis can now go off to be stripped and checked before […]
The floors and interior of our 1953 Aston Martin DB2/4 were completely stripped, along with the front end and bonnet. Then the body fixings were removed and the body was carefully taken off for blasting/paint removal.
After removing the body of our Aston Martin DB2/4 yesterday, classic car technician James has continued his work on the strip down of this classic Aston. The front doors and windows have now been stripped out ready for refurbishment, all parts will be cleaned, sorted, painted or replaced where necessary before refitting the newly painted […]