Jon, one of the in-house restoration experts here at Bridge Classic Cars has spent some time working to get the doors on the 1954 MG TF to fit and close properly.
Firstly, Jon removed the door card from the classic sports car where it was then given over to one of our in-house trim experts, Kath, to repair. Whilst this was being done, Jon got to work on the doors. The first thing Jon noticed was that the spot welds that attach the door skin to the frame had popped and allowed the door to not sit level. So, Jon quickly spot welded the door skin back on before beginning work on the hinges.
Jon, upon inspection, noted that the lower hinge of the door had too much movement. So, Jon made up a spacer to sit between the door and hinge allowing a much tighter fit and better alignment between the door striker and the hinge.
Whilst Kath in the trim shop had the door card, it was decided to create a new check strap for the door in as close of a match as possible to the existing leather.
While waiting for the door card and check strap, Jon began work on adjusting the strikers and hinges so the door would shut evenly and level. With some small modifications needed to one of the latches, everything was eventually right in place to line up perfectly for the little sports car.
