Secured – New Engine Mounts for the 1972 Lotus Elan

By Craig Ranson
By Craig Ranson

Managing Director – Bridge Classic Cars

The 1972 Lotus Elan +2 which arrived from South Africa recently at the bridge Classic Cars workshop has had its full inspection completed and now, the work can begin on the classic sports car.

The technicians noted that the engine mounts had begun to deteriorate and were moving around too much for our liking. So, the team sourced a new set of replacements to be fitted to the car. Putting the car up on the lift and carefully undoing the old mounts, Jon was able to support the engine from underneath and move the car slightly up and down to free the old mounts.

With these out, he could install the new pieces between the engine and subframe and tighten them down correctly. But before then, Jon had to make some modifications to the mounts as it now made the engine sit around 5mm higher in the engine bay. So, Jon removed the mounts and elongated the holes towards the top of the opening in order to give some adjustability and drop the engine down away from the bonnet.

Along with this, he also adjusted the bonnet catches to line up perfectly and take some of the stress away from the piece and fitted a new bitumen sheet to the underside.

Share this post
Enjoyed this article by Craig Ranson?
Email Craig Ranson