By Craig Ranson
Lydia has been continuing her prep work on the 1998 white Honda Integra Type R.
She unclipped one of the rubber seals on the underneath of the door she’d been sanding down and filling, before cleaning off old glue and dirt with panel wipe solution. The paint on the inside of the door then got sanded down lightly with a red scotch pad to get rid of any shine.
Once that was all done, Lydia moved onto the front wings of the car. These went through the same process as the door, of sanding with a small block sander to map out the imperfections in the surfaces, then filling with a skim of filler, and finally sanding over again to level out the filler.
Share this post
Enjoyed this article by Craig Ranson?
