Restoration

Our 1955 Aston Martin DB2/4 has been getting a lot of attention lately. The stripped chassis has been sent off to the sandblasters. Before it went, Rob stripped the last remaining parts off the shell and chassis and removed the…

Our 1963 Bentley S3 has recently returned to the Bridge Classic Cars workshop. As you can see, from the photos below, it now looks very different to how it did a few months ago when it first arrived. When it…

Our 1964 Triumph TR4 has recently arrived at the Bridge Classic Cars workshop. This is one of the latest classics to come to us for a full restoration. Once work begins, it will be exciting to see the car slowly…

Last week, James started to strip the running gear down of our 1953 Aston Martin DB2/4 for refurbishment. The axles have been broken down into component parts ready for blasting/cleaning and then painting, any worn or damaged parts have been…

Rob has continued the strip down of our 1955 Aston Martin DB2/4 Drophead Coupe. As he was doing this, he found some highly questionable previous repairs. I think Rob said it best when he said: “The next time you look…

Fabricators Chris and Monty have been continuing their work on our 1951 Austin Devon Pickup. They have repaired the pillars as well as fabricated the left-hand step. Chris also went on to start making the cab corner.

Our 1955 Aston Martin DB2/4 has begun its process of being stripped down by classic car technician Rob. It will be stripped down to a bare chassis, ready for its full restoration to get properly underway.

Our 1951 Austin Devon Pickup has continued its stay in our fabrication bay with technician Chris. Chris has been repairing the A-pillar as well as working on the nuts which are used for the suspension mount. Our classic Devon will…

The last sections of our 1953 Aston Martin DB2/4 have been removed, the radiators and other engine ancillaries, the engine and gearbox removed, then the chassis and bulkhead were completely stripped of suspension, steering and brake components, along with wiring…

The floors and interior of our 1953 Aston Martin DB2/4 were completely stripped, along with the front end and bonnet. Then the body fixings were removed and the body was carefully taken off for blasting/paint removal.

As the restoration of our 1959 Jensen 541R is coming toward its end, Rob has fitted new studs into the front grille badges and trim ring. He marked the positions of the new fixing holes and drilled them before bolting…

Our 1976 Triumph Spitfire has continued to make good progress at the hands of technician Rob. Rob has built up both front spring/shock absorber assemblies and fitted them to the car. He also fitted the poly bushes to the rear…

Steve has been stripping down the seized wiper linkage and of our Ford Transit MKII Tipper and fitted it to the front bulkhead after reassembly. He then refitted the newly painted peddle box and cleaned and serviced the heater box….

After removing the body of our Aston Martin DB2/4 yesterday, classic car technician James has continued his work on the strip down of this classic Aston. The front doors and windows have now been stripped out ready for refurbishment, all…

The wheels have been put on our Ford Transit MKII Tipper. Once they were back on, a team of technicians (and some marketing folk too!) moved it from one ramp to another, ready for the next stage of its restoration…

The mechanical strip out of our 1953 Aston Martin DB2/4 has started at the rear of the car. The tailgate, lights, spare wheel carrier and fuel tank have all been removed. Classic car technician James actually found some of the…

Steve has been working on our Ford Transit MKII recently. After the distributor, carburettor, alternator mount thermostat housing, and inlet manifold were vapour blasted, Steve zinc plated the parts required ready for assembly. The carburettor and distributor have been reconditioned…

Classic car technician Paul has been continuing the process of rebuilding our 1956 Jensen 541. He has fitted several more components as well as fabricated steering box mounts and the pedal box.

Classic car technician Steve has been completing various tasks on our Ford Transit MKII Tipper. The hand brake pivot bolt and rear brake load valve adjuster were both seized and had to be cut off and removed using oxygen and…

Steve has continued his zinc plating lately. He has been focussing on the front and rear suspension nuts, bolts, and washers. As well as the zinc plating, Steve has also fitted the front springs as well as the front and…

Our 1976 Triumph Spitfire has been in the Bridge Classic Cars paint shop with technician Alan. Alan has been applying polyester primer to the doors, boot lid, and bonnet. The first stage of this was to reapply epoxy primer to…

Classic car technician Steve has been getting various parts of our Ford Transit MKII Tipper ready for zinc plating. These parts included components from the suspension and the brake wheel hub nuts. To prepare them for zinc plating, Steve made…

We currently have 3 Aston Martin DB2/4s in the Bridge Classic Cars workshop. Out of all of them, our 1955 Aston Martin DB2/4 Mark I is the furthest along its restoration journey. In fact, it is coming to the end…

Classic car technician Paul has been working on the front suspension of our 1956 Jensen 541. After removing the worn bearings, new parts were fitted. The components that make up the suspension were then checked and cleaned ready to be…

The restoration of our one-of-a-kind 1905 Rilep 9HP has been something of a labour of love and dedication. With very little reference material to work from, bringing this piece of automotive history back to life has been challenging, to say…

The bumper of our Ford Transit Tipper MKII is all painted and now finished in a satin clear. The rear suspension springs have also been in the paintshop and have had black dtm applied. Chris has also fixed and painted…

Jonn has been working on our 1987 Mercedes 500SL. He assembled the wheel bearings and hubs and fit them to the car. New discs were also fitted before the wheels were refitted. Jonn checked and adjusted the bearings. The bearing…

Work on the interior of our 1953 Aston Martin DB2/4 has continued as Brian and Lydia have made new boards for the kick panels, as well as removing the seat frames and the old covers from the dash top panels…

Our 1905 Riley 9HP has been with a friend of Bridge Classic Cars, Darin, from Ashbocking Joinery. While our one-off car is with Darin, he has been starting the first phase in the process of mounting the front body and…

Classic car technician James has been working on our 1972 Ford Transit Tipper. Since leaving the Bridge Classic Cars paintshop, it is now in the main workshop where the next phase of its restoration will take place. James repaired the…