1960 Jensen 541R

2020 In Reflection

It goes without saying, 2020 has been tough for everyone but there have been some positives! Bridge Classic Cars turned 16, we welcomed in more

Read More ยป

Workshop Walkaround

Grey Jensen gets furnished Our trim team has been fitting the rear centre section in place, cutting out sound deadening and glueing it to bodywork

Read More ยป

Friday Snapshot

As ever, it’s been a busy week here at Bridge Classics. We’ve had new cars arrive like the Mini Clubman, we’ve had a new winner

Read More ยป

Suited And Booted

Our ย 1960 Jensen 541Rย has had another round of interior fittings measured up, made, and installed by our talented team in the Trim Shop. This time

Read More ยป

In Pursuit of Perfect – Retrimming Seats for our 1960 Jensen 541R.

For a handmade classic car, only a handmade interior will do. This is much the story with our beautiful 1960 Jensen 541R we have in the trim shop here at Bridge Classic Cars for one of the incredible owners, Gordon.

Our beloved Lilac has been in the trim shop recently to have our in-house trim experts begin work on upholstering the seats for this truly unique car. Starting from scratch, our upholsters began laying out the original frames and foams to ensure that the new set, which are handcrafted in-house, would fit. They also had to suit the cars classic but also quite contemporary lines.

The webs for the rear seat needed to include the signature rear hump. This had to be taken into account when making this one-off interior. The rear is a masterpiece of flowing lines that finish in neat and crisp corners that perfectly suit a car of this calibre. The padding was selected to give the most amount of support for the driver and passengers whilst out there enjoying the gorgeous 541R.

Our in-house team of automotive upholsterers took their time to make sure that the front seat also was given the same treatment as the rear. Skillfully matching the compound shapes and curves that make up the best seat in the house when it comes to enjoying a truly unique classic car.

Jensen 541R Interior Update

Brian has been working on the interior for the Lilac Jensen 541R recently. He is currently gluing the front cover to front seat base tub in these pictures. The original and very first owner certainly hoped to make a very bold statement. This car left the Jensen factory finished in Lilac with white interior so we are restoring back to the factory specifications.

If a new owner is found prior to the project completion and wishes for the specifications to be altered in any way this is perfectly acceptable and can be arranged.

Front squab fitting for the Lilac Jensen!

In the trim shop, Brian has been fitting the front squab seats of the 1960 Jensen 541R to their foams and frames. These seats were created and sewn by Lydia a little while back. You can read about the process here and here.

Brian started the fitting process by glueing and stapling the front squab “faces”/fronts to the frames, making sure the leather was nice and tight with no wrinkles. The staples went around the back of the wooden frame. The back of each seat was then attached with staples that went into the piping flange. 3mm plywood was cut out to the correct shape using a paper template for the bottom of each seat, this was wrapped in the white leather/glued onto the wood. This plywood was nailed onto the bottom of the seats with tacks and does the job of hiding the staples and raw edges of the leather.

Jensen Journaal – July 2021

It is lovely to receive a copy of the Zomer 2021 Jensen Journaal in the post this week.

Several of our Jensens that we have restored have been featured in this month’s copy of the Dutch magazine, Jensen Journaal! https://jensenholland.nl/ It’s an absolute privilege, so thank you.

The magazine talks about our 1957 Jensen 541R, the 1958 Jensen 541R, the 1960 Jensen 541R and the 1960 Jensen 541S (The Prototype).

Here are our website links to the cars that were featured to find out more information on each of the restoration projects.

https://bridgeclassiccars.co.uk/category/projects/completed/1958-jensen-541r-navy/

https://bridgeclassiccars.co.uk/category/projects/completed/1957-jensen-541r/

https://bridgeclassiccars.co.uk/category/projects/completed/1960-jensen-541r-01/

https://bridgeclassiccars.co.uk/category/projects/completed/1960-jensen-541s/

Bespoke Jensen book bag!

We call it the Jensen bible and in order to protect it Kath has made a bespoke leather book bag.

Jensen Genome Richard Calver July 2019 Edition

She started the process by drawing, measuring and working out the dimensions and design for the bag. Black leather was cut out to the required shapes and measurements and then mounted onto 3mm foam. She then sewed around the edges of the mounted pieces to make sure they were secure.

The first step in putting it all together was to sew a zip between two pieces of mounted leather with a zipper foot. Red topstitching went down either side of the zip as a finishing touch. Kath attached the zip and sidebands with clips onto the front of the book bag, to make sure it all fitted together, before sewing in place. She checked the book fitted inside, before sewing the back of the bag on. Red topstitching running around the outside edges of the front and back matched the zipper.

Jensen Update

Our soon to be Lilac Jensen is currently sat in our workshop awaiting its next stage.

Lilac Jensen Fibreglass Repair

Our 1960 Jensen 541R is undergoing some fibreglass repair in our paint shop. Matt is currently working on the boot lid that needs to be repaired with filler, shaped up and smoothed down.

Lilac Jensen Seats And Fibreglass

Lydia has been working on the 1960 Lilac Jensen that our director, Gordon, is having restored.

She has perforated the leather which arrived and then made fluted faces for the front squab and base seats with it. Then, she marked out the lines on the back of the leather and onto scrim foam to use as guides. Next up, Lydia could sew in the flute lines to complete the front squab and base flutes. Lydia had to create a seam in the base of the flutes as well as attaching calico to the seams. The seam and calico then get pulled tight on the foam. Lydia’s next challenge was to sew in sidebands onto the front base seat as it wasn’t in the original design. Once confident with the patterns, Lydia could cut them out. She sewed piping down the sidebands before attaching to the sides of one of the fluted base “faces”. Then she piped around the outside of the whole thing and checked to see if the foam would still fit. Lydia then worked out the front squab seat next. She piped the sides of the fluted “face” again. She then lay it on the frame because she had to mark where to trim the sidebands, these had to be adjusted slightly because of the new design.

Lydia then made cuts in the foam for the piping to sit into and to give a good shape. She then glued the piping down into them. She then stapled around the back and the bottom of the frame to hold the front squab in place.

Next up, she marked out the leather for the back pieces for one of the front base seats that she started on before. She then clipped them around the piping of the “face” to check the fit before sewing on.

Below you can see the original foam for the seats. Lydia took this off as the old wadding that was falling apart. She then covered the front and sides of the original foam in new scrim foam. The back has a wooden and calico frame attach to it so she didn’t need to put any on there.

Lydia then moved one to making the second front base seat. She did this in the same way as the other one. She made a fluted face with a seam in the middle, then piped the sides, attached the sidebands and piped around all that. Then she marked out the notches to match the back pieces on.

Matt has been working to repair the fibreglass side panels by applying glass matt repair. Once repaired, the wings, panels and sills can be prepped for primer. They also need to be shaped up after each stage of filler.

Lydia has continued to make the base of the seats on the Jensen. She has marked out the leather and foam with flute lines as a guide for sewing. She has then sewn the flute lines and attached them to the foam. The fluted are now faces finished. Next up, Lydia is set to work out the middle section as this needs to be altered from the original. She began by making a paper pattern on the new middle shape and making it longer and wider. Lydia then sewed the seams across the middle of the fluted faces and made paper patterns for the top sides to attach to the fluted faces. Then she cut leather versions out from the pattern as well as cutting out the middle section using the new middle section pattern she made.

Lydia then piped the sides of the middle section and sewed the fluted faces to this. She followed by piped the other sides of the fluted faces and attached the top side pieces. Next up Lydia marked out and cut out all the pieces for the skirt and sides. She then measured, marked out and cut out strips of calico and sewed all the pieces together for the sides and skirt. She then sewed a strip of calico to the curved piece and sewed calico to the inside seams of the faces. This helps when fitting on the foam. Then Lydia clipped the skirt and sides piece to the main face piece to check the fit.

Lydia has continued to make the rear squab by cutting strips of leather for piping, clipping the pieces together for the sides and bottom and then sewing them together. She used the piping she’d made before and sewed them around the outside of the face. Lydian then sewed the sides and skirt onto it to finish.

Lilac Jensen Update

Ady has taken apart the lilac 1960 Jensen’s rocker shaft to be cleaned out and rebuilt to ensure it works as it should.

Brian has been gluing foam onto the front face of the rear quarter seat panels. He then stapled the cover to the top of the wood and glued the cover down over the lower mill board section. Once the rear quarter panel of the seat was finished, he could then get started on the others by following the same process. The next step was to glue the front flap to the seat base and add foam and wadding to the inside and outside of seat tub. By pulling the cover around the tub and gluing the edges, the cover can then sit taught to the seat, giving it a fitted and tight finish. The excess leather is then trimmed and the seat tub is finished.

Lydia has also been working on the lilac Jensen by cleaning up the metal frame for the front base seat and then covering the front of it in calico and wrapping it around the frame. She then drew out the flute line patterns for the front squab and the front base seats. Jensen’s don’t usually have fluting around the front squab and front base of the seats however this is something Gordon has requested. Lydia then cut out the leather for covering one of the front seat tubes. Then she clipped the front to the back for dewing and then she sewed all the pieces together.

Lilac Jensen Interior Seats

Lydia has been working on the interior of the 1960 Jensen 541R which is Gordons restoration project and is fondly referred to as the Lilac Jensen as that’s the colour he’s chosen for the paintwork.

Lydia has made the second front seat backboard. First, she started by glueing white leather to the millboard, creating the piping to go around the curved edge and then glueing the piping in place around the underside edge of the board. She then marked out lightly where to place the pocket which she made before. Then she glued it into place around the curved edge. After sewing the pocket in place, she took apart the cover of the second seat tub. She marked out the tub which will help her recreate the cover for it. Once she’d taken apart the front base cover, Lydia took it all apart.

Lilac Jensen Gets New Seats

Our Jensen 541R restoration project, currently owned by our director, Gordon, is currently getting new seats made by our trim shop. Most recently the tubs have been stripped to be recovered. All the old rails have been removed and old patterns have been measured up next to the tubs to see if they fit or if the designs need to be modified. Parts were then marked out in new white leather to cover the seats, including the seat skirts, side panels, and front section of the seat. Piping along the edge has been made and all the parts have been laid down over the tub.

Lilac Jensen Trim Continues

Recovering the rear side panels and rear side window surrounds included cutting out dark blue leather to cover the wood and glueing them to the front of the wood followed by wrapping around the underneath, trimming to shape and glueing down.

Making the new sideboards on the front squab seats for the Jensen included sewing up the corners first to fit over metal bars, stapling them onto the seat around the back, gluing the front of each sideband onto the foam, trimming away the excess leather and then the process is repeated for the other squab.

Lilac Jensen Update: Engine And Head Cloth

Ady has almost completed fitting the engine back together after its full re-build, part of which was done here and part of which was done at Scholar.

The engine was originally stripped down and inspected for issues when Ady found that the engine needed to be re-bored to suit new pistons. The crankshaft was also reground and new bearings were fitted. Ady also fitted new oil pumps, rear seal conversion on the rear of crankshaft, new core plugs, new timing chain and new camshaft followers. The cylinder head is currently at Coltec, having an unleaded conversion and a reface.

Lydia has started on remaking the headlining on the lilac Jensen project. She first cleaned up all the metal poles that go into the loops across the headline and then inserted the poles inside the loops.

Lydia has also been working on the front seat squab. She began by marking it up so she would know how the pieces go back together, beginning by taking the back of first and then the front covers and adding in 3mm of foam. She then glued in some calico onto the back board to strengthen it when sewing. Lydia then made and added piping to go around the back board and covered the front of the backboard with new white leather. She then glued and sewed the piping in place. She then started making the pocket by drawing around an the original one onto the new leather, sewed the elastic in the top and tacked the folds in place at the bottom. Lydia then folded the edges under and glued the pocked onto the backboard.

Brian has also been working on this Jensen alongside Lydia and has bade the rear seat centre section of of the new leather. He begun by marking out the fabric, adding in extra foam and gluing the cover over the centre, pulling tight the leather over the sides. He’s also re-glued the foam back in place for the front seat squab which was done after he removed the old foam. Brian then made the new wood section for the bottom of the seat frame and added new foam to the side sections. New foam has been added to the middle section for the back of the squab.

3D Scanning Of The Jensen

Here at Bridge Classic Cars, we have a variety of services and a can-do attitude. If you ask it, we can do it! We have access to this clever 3D scanning software called SHINING3D which allows us to scan objects such as our lilac Jensen 541R chassis and the device turns it into a 3D digital sketch, making further design modifications easier.

This scanning technology provides a degree of precision unobtainable through hand-drawn textures. Taking into account angles, textures and difficult designs, this device can determine the shape and size of the object you wish to scan. Alongside giving us an accurate template from which to work when it comes to modifying a vehicle, it also takes note of any corrosion and deterioration of the object. This state of the art technology is changing the game when it comes to design and manufacturing machinery.

Twenty Twenty: The Year Of The Jensen

Some of you may remember we mentioned our busy Jensen workshop last year, and it hasn’t slowed down in 2021. We’ve become the Jensen Specialists of the UK with a constant set of Jensen 541R and 541S projects passing through our doors on a regular basis. With projects ranging from full nut and bolt restorations to small fixes and services, we’ve been inundated with Jensen’s, and we love it!

2020 saw 8 Jensen’s in at the same time, which led to this amazing shot of them all lined up. Our technicians are now well versed in Jensen mechanics, electrics and bodywork as we’ve still got 6 of them in the workshop plus another stored at Bentwaters waiting to find a new home.

With only 193 Jensen 541R’s ever made and 127 541S’s made, and even fewer still on the road, we’ve had a large quantity of them in the workshop.

Update on Gordan’s Jensen

As some may know, Gordon has a 1960 541R Jensen that’s being restored with us. Much like the Peony Red Jensen, this full restoration has been nicknamed as the ‘Lilac’ Jensen as Gordon aims for it to be done in a two toned Lilac finish, however that stage is a while off.

Chris has recently put the door frames into the paint bay to have epoxy primer added. With this step completed, it edges ever closer to becoming its namesake colour.

Lilac Jensen Perfections

Gordon’s (soon to be) Lilac Jensen 541R is currently being prepped for paint. Trevor is smoothing out any bumps and cracks as well as applying spray on primer and filler before the first layers of paint is applied.

Refurbishments On Speed Dial

We’ve sent off a collection of our dials back to Speedograph to refurbish them. These all belong to our Lilac Jensen 541R, the Amphicar, the Peony Red Jensen and a Mercedes.

2020 In Reflection

It goes without saying, 2020 has been tough for everyone but there have been some positives! Bridge Classic Cars turned 16, we welcomed in more unique and interesting cars, expanded the team and took new ventures.

2020’s Winners

This year we introduced our competitions back in May. With an uncertain year ahead of us, we wanted to provide some excitement to our followers, and what better way than to offer the chance of winning a car for less than ยฃ20! It wasn’t easy at first, but now with over 21 winners and up to 4 competition cars running at the same time, we’re doing better than ever. So far we’ve given away ยฃ561,197.00 worth of classic cars!

This week we’re delivering our latest winning cars, our 1974 VW Beetle that was won by Colin Knight and our 1995 Jaguar XJ6 who was won by Nick Nicola just before Christmas! We’re being careful to make the delivery as safe as possible, complying with tier 4 guidelines but we can’t wait to see Colin and Nick’s reactions!

1967 Jaguar E-Type Series 1 Race Car Replica Completion

Its been a long restoration, but we were delighted to announce the completion of our very own project, our 1967 Jaguar E-Type Series 1 Race Car Replica. Its come a long way from the decrepit shell we started with in 2017. Every detail, right down to the colour has been custom made and designed. This truly is a Bridge Classic Car. You can see it’s story here.

The Year Of The Jensen

We love every and any classic car and are in turn, we’re equipped to fix and restore any classic too, but 2020 for us was the year of the Jensen. We’ve had eight 541R/541S’s in this year, some of which are still with us being completed. With only 193 Jensen 541R’s and 127 541S’s ever made worldwide, to have so many in at all really is outstanding, let alone all at the same time.

The 541R models were manufactured between 1957 and 1960 when they were later replaced by the 541S that ran from 1960 to 1962. Whilst each car is incredibly unique with its story and bespoke restoration, they are also very similar, and as you can imagine, with 8 very similar cars in at the same time, it took a while to get our heads around which was which when referring to them.

Expanding the team

2020 saw the birth of the Trim Shop. Whilst we’d had individual trim specialists working with us before, we were yet to dedicate a department to it! Last year saw the creation of the Trim Shop, giving the speciality its own workshop and team which continued to grow throughout the year. Originally just Kath and Brian, we have welcomed a new face to the team recently. Lydia has now joined us and is another much-valued member of the trim shop. Having our own trim department allows us to continue keeping all our restorations under one roof, limiting the outsourcing as much as we can.

We’ve also had Ellie join this year, adding to the marketing department. Previously we had just Freddie, and briefly Charlotte doing our marketing, but as the company started to grow, we found the need to take on another set of hands for our marketing and visuals.

One of a kind – Chevron B20

We’ve had some very unique cars in this year, including this original 1972 Chevron B20. Its seen top racing drivers, international races and a big crash in its lifetime and nowWe’re selling this on behalf of the owner but in the meantime, we’re enjoying housing this incredible special car. You can find out more about its history on our blogs.

Introduction of editorial shoots

The latter part of this year saw us start shooting some of our cars in a more editorial and creative style. Whilst we’ve always organised high-quality shoots of all our competition and for sale cars, we decided to add models to some of the shoots to make them a bit different.

Now we have both Freddie and Ellie on shoots, it means we can also get behind the scene insights into our shoots.

Bespoke restorations; A tribute

Another interesting and heartfelt restoration this year was our 1972 Jaguar E-Type Series 3 that we restored. In memory of their late uncle, the owner paid to have a commemorative plaque fitted by the handbrake. We also embedded one of their Uncle’s favourite cufflinks above it as well. As we always say, each restoration is special and every car carries its own stories, but this one was particularly special.

Car Show 2020

Last January, we had our open morning car show that proved to be incredibly popular. After having to cancel our 2021 January open morning show, we hope to organise one for later this year.

Gordon’s Jensen Gets New Metal Work

Our director Gordon, Craigโ€™s father, also has a car in with us at the moment, however it doesnโ€™t look much like a car currently..

This is a 1960 541R Jensen which will, when reassembled, be painted a two tone purple.

So far its been welded and hand crafted in our fabrication bay. The rear arches and floors have all been hand fabricated.

Weโ€™re expecting to see the completion of this Jensen by the end of 2021.

Workshop Walkaround

Grey Jensen gets furnished

Our trim team has been fitting the rear centre section in place, cutting out sound deadening and glueing it to bodywork behind where seats go.

The rear squab section has also been fitted in place, the carpet has been cut to be placed in front of the rear seat base, the rear seat section has been fitted in place, and the leather has been glued to the seat subframes.

Sound deadening has been installed in the rear footwell & tunnel sides, passenger side, passenger side bulkhead, and the front footwells.

The door frames are also undergoing some modifications so that the window glass sits more comfortably. The doors will need to be taken apart and re-welded back together.

Peony Red Jensen

Our Peony Red 1960 Jensen 541s has had new door catch fixing plates installed. Our technicians have also made a cover to go over them to stop them from falling down into the sills of the car. They have then been welded into position.

TR6

The Triumph TR6 is on the road to recovery with the final tweaks being done. The engine levels have been checked as have the gearbox and rear axels. This stage is mostly a pre-drive service to make sure everything is in the right place and ready for the car to be driven for the first time. The battery holder needs to be installed and the engine to be tuned. Once these last details are done we can turn it on and see how it drives and address any teething problems that may arise.

Amphicar

The Amphicar is currently going through another in-depth stage of troubleshooting the electrics. Much like the TR6, our technicians’ are applying the final checks in preparation for starting the car up for the first time.

Peugeot 504

The Peugeot 504 is almost finished! The exhaust and break lines have been installed as well as the seat belts which have been added by our technician Scott.

Black Jensen

The black 1960 Jensen 541R has come out of paintwork recently to address the corrections made. All the chrome has now been re-installed so it’s looking shiny and new!

1984 Lada 1200

Our Lada is one of our most recent patients. We diagnosed it with rusting sills and floor, which is being addressed and corrected by one of our fabricators, Ant. These refurbishments are done through a series of stages that include welding and applying filler to resolve the ageing. Think of it like getting a dermatological facial!

1973 Jaguar E-Type Series 3 V12

Our blue jaguar e-type is awaiting its chrome bumper and new steering rack to be fitted. The sun roof has also been fixed. This included taking apart the faulty switch and cleaning the components and then insulating the terminal. Once fitted back together, the sun roof was back to working perfectly again.

Gold Jensen

Our gold and red 1962 Jensen 541S has had its oil changed and water purged from the engine by our engine specialist, Ady.

Austin 7 Nippy

Ady is also working on the Austin 7 Nippy engine which is currently at COLTEC to be assessed.

Nissan 300ZX

The exhaust has been reinstalled into our Nissan as well as the link pipe between the two exhaust manifolds.

Workshop Walkabout

There’s been a lot going with week already and its only Wednesday! Take a look at what’s been going on s far.

Range Rover Sport 2016

One of our directors, Gordon, had his Range Rover Sport’s tyres refurbished, ready for the cold winter months ahead. Now fully refurbished, Gordon’s Range Rover is ready to take on the elements.

Jaguars New Stripes

As seen in our blog yesterday, the 1967 Jaguar E-Type Race Car has now been finished! This has been an incredibly exciting project that has been in progress since 2016. Over the last few days, the finishing touches have been added such as the pinstripes on the bonnet and fine-tuning the engine. The bonnet itself has also be re-installed to make sure it fits after the recent engine works.

Craig’s Mercedes 500SL

Our other director, Craig, is in the process of choosing the leather for the interior and the spray finish for the fuel tank. It’s deciding details like this that make classic cars so personal to their owners.

Morris Minor

One of the more notable updates on the Morris Minor 1000 is the new hood. The trim shop has done a fantastic job yet again to make the perfect custom hood, allowing this Morris Minor to be more usable throughout the changing seasons. Our technician Scott has also been trying to figure out the reason for the play in its front wheels. The mystery is yet to be solved…

The front suspension has also been tightened, the curtesy light wiring is being installed and Adam is troubleshooting the electrics.

Grey Jensen 541R

Lots of little updates for the Grey Jensen 541R such as preparing the door rim before it goes to the trim shop, stripping the bonnet ready for paint, made the curtesy light switch by hand, installed the hand brake cables and panhard rod as well as the speedo drive.

Triumph TR5

Our 1968 Triumph TR5 is awaiting its interior but it has had its heater installed!

Blue E-Type

Our blue 1973 Jaguar E-Type Series 3 is awaiting on a new steering rack, clutch slave cylinder and bumper to be fitted. The parts have been ordered so the E-Type should be looking good as new in no time!

Ford Transit

This lovely 1953 Ford Transit is almost ready to leave us now. We’re just waiting on some new 6 volt bulbs for the headlights and then it’ll be ready to go!

Blue Jensen

We’re giving the blue Jensen a general nut and bolt service. It came in to have its clutch, exhaust and breaks replaced which have been or are in the process of being fixed.

Peony Red Jensen

The Peony Red Jensen 542S has had its seats made up. The next step is to complete the set and install them. Our trim shop never fails to impress us with their stunning interior projects.

Peugeot 504

The Peugeot 504 has now had all its interior trim completed. The last few pieces include making and fitting the hood which had to have the leather glued to the frame once made up.

Black Jensen

The black Jensen is visiting our paint shop for some touch-ups and corrections in the paintwork.

1988 Nissan 300ZX

Ady our engine specialist has taken apart both exhaust manifolds on the Nissan 300ZX.

Amphicar

The fuel pump has been rewired, two bilge pumps are set to be added, the brakes have been bled, the grease nipples re-greased and the heater has been ordered.

Range Rover TDI

A new gear stick gaiter has been made and fitted by the trim shop. Our range rover is making steady progress to be completed soon.

Black Spitfire

Although we don’t have the Black Spitfire back with us, we do have the task of replacing the half shafts. We’re hoping we can order in new pieces however we may need to take these apart instead and refurbish them ourselves.

Centre Console Fitted In The Grey Jensen.

This week the centre console trims have been made and fitted in the 1960 Jensen 541R. The first step was to make the top piece, which was sewn and piped by our interior trim technician Kath, before passing it over to Brian.

Once the leather top piece had been passed to Brian, our other interior trim technician, he added foam padding and made the rest of the centre console.

Now assembled, it can now be fitted into the Jensen.

Friday Snapshot

As ever, it’s been a busy week here at Bridge Classics. We’ve had new cars arrive like the Mini Clubman, we’ve had a new winner announced yesterday and lots of new developments with our current projects. Here’s what’s gone on throughout the week!

Peugeot 504

Our engine specialist Ady has been working on the 504’s engine by fitting the flywheel and couch before fitting it back into the Peugeot.

The Peugeot has also had a recent trim shop appointment, with new carpets being made and fitted by our expert, Brian.

1960 Black Jensen 514R

The Black Jensen has had new sills made and fitted to give the finishing touch to the bottom of its driver’s door.

1994 Nissan Micra Dot

The Nissan Micra has now been finished! The paintwork has been completed, bumps and scrapes were taken out and it’s pretty much ready to go again! This endearing little Micra would make the perfect first car for someone learning to drive!

1988 Nissan 300ZX

The Nissan 300ZX has come in recently and appears to have some rather severe rust issues on the lower door sills. Among other restorations, that rust and those holes will have to go! You can see the rest of the work here.

1963 Morris Minor 1000

One of our technicians, Scott has been working carefully on the Morris Minor’s dazzling red interior. The door cards, handles, and carpets have all been fitted.

1960 Lilac Jensen 541R

This Jensen actually belongs to Bridge’s director and founder, Gordon Ranson, and is now starting its restoration journey with us! There’s a lot to do but we can’t wait to see the final product!

One of our technicians Anthony has been working on the body, hand making a lot of the elements such as the boot floor.

Barn find Mercedes

Barn finds are like hidden treasures and we love them when they come in. Currently, we’ve got two prospective projects that need cleaning up and assessing before we know what needs to be done. We really hope we’ll be able to work on these two cars!

Over the Pond Austin Healey

This Austen Healey 100 BN1 is currently residing in America but could be ours soon! Keep an eye out on our website and social media pages for updates!

Craig’s new Gastron

When you work with classic cars all the time, sometimes you want to mix it up a bit. That’s exactly what our Director Craig has done! He’s recently acquired this 3 litre speed boat. Fingers crossed for nice weather soon then!

Red Jaguar E-Type

Another prospective project has been viewed recently and it’s a beautiful red e-type that needs some TLC!

Suited And Booted

Our ย 1960 Jensen 541Rย has had another round of interior fittings measured up, made, and installed by our talented team in the Trim Shop. This time it’s the Jensens boot that’s been fitted.

Each piece of the boot carpet has been measured by hand, stitched, and fitted in a bespoke pattern. No trim is ever the same.

1960 Jensen 541R in Epoxy Primer

Chris has completely painted our Jensen 541R in epoxy primer, this will weather seal the car until it is ready to be prepared for paint.

Jensen 541 Engine Strip Down

Ady, Bridge Classic Cars’ engine specialist has begun work on our Jensen Engine restoration. He’s stripped down the engine ready for cleaning, refurbishing and then rebuild.

Having completely restored several Jensens in recent months, we’re very familiar with these wonderful classics.

Does your Jensen need restorative works? Get in touch to see how our Jensen specialist mechanics can help.

Day 2 of our 3 day trip: Ian Forster’s Jensen Collection

We left Shaw Hill Golf and Spa Hotel mid morning to continue with our journey up to Cumbria. As we climbed higher and higher up the hills we quickly begun to realise that our decision to pass the previous fuel station without stopping, thinking ‘we’ll go to the next one’, was not the best decision to have made.

The roads were getting smaller and smaller and gauge was getting lower and lower.

Eventually we stumbled across a small village called Alston and as we entered the village we were welcomed by the bright lights of a Spar fuel station.

Source: Visit Cumbria

High up in theย North Pennines, Alston claims to be the highest market settlement in England, being about 1000 feet above sea level. It is also remote, about 20 miles from the nearest town. From every direction Alston is approached over a broad, heather-clad Pennine landscape which has been designated an Area of Outstanding Natural Beauty. Set on the upper reaches of the River South Tyne, it lies within the Eden district of Cumbria.

Alston has a steep cobbled main street with a distinctive market cross, and many stone buildings dating from the 17th Century. Next to the entrance to the Church, is a building dated 1681. The Angel pub to its left is dated 1611, and the white building left of the pub is dated 1687. It is a bustling town, with a reputation for delicious locally made specialities such as Cumberland Mustard, and Alston Cheese.

Alston Moor grew as a lead mining community over four centuries ago, with Alston town serving the mining families. You can see the history of the lead mining industry in the area at the Nenthead Mines Heritage Centre, nearby.

Alston is the starting point for theย South Tynedale Railway, Englandโ€™s highest narrowย gaugeย railway.


St Augustineโ€™s Church
 was built in 1869, but records show a church has existed here as long as 1145 AD. Inside the church is an interesting clock, brought from Dilston Hall, the home of the Earl of Derwentwater.

The Gossipgate gallery, displaying regional arts and crafts, is housed in the former Congregational Church.

The A 686 from Penrith in Cumbria to Corbridge in Northumberland, which passes through Alston, was chosen by the AA Magazine as one of their โ€˜Ten Great Drivesโ€™. Between Alston and Melmerby, the road climbs the Hartside Pass to a height of 1904 ft, from where there are magnificent views across the Solway Firth to Scotland. This long and steep climb also forms part of the Sea to Sea Cycle Route.

Part ofย The Pennine Wayย long distance walk is through East Cumbria, from Alston, andย Garrigill, overย Cross Fellย (which at 2930 feet is the highest point on the Pennine Way),ย Great Dun Fell, towardsย Dufton, then on toย High Cup Nickย andย Cow Green Reservoir, on the border between Cumbria and County Durham.


Whilst filling up our truck we were approached by a very smartly dressed gentleman impressed by our trailer and intrigued by the logo as to what we may have inside.

The gentleman in question was Ian. After a brief conversation with Ian he invited us to take a look inside his workshops at his own collection of classics. Of course, we obliged.

Little did we know that Ian was in fact Ian Henderson from J.H Henderson and Sons and his collection of classics did not just stop at the 3 vehicles he had within his workshops. As he continued his tour with us into his own museum where he housed one of the most incredible collection of classic and vintage memorabilia we have ever seen.

If you are ever visiting the area on your holidays do be sure to pay a little visit to J.H Henderson’s Hub Museum and thank you so much to Ian and his team for welcoming us in with open arms.

On we went with our journey up the hill to visit the Jensen 541 convertible, the main reason for our journey…

Upon arrival, we were astounded to discover not 1 Jensen but 4 incredible Jensen’s to look around.

The main reason for our visit was to view a very rare Jensen 541 convertible. We are considering converting our Jensen 541R into a convertible and Mr Forster (owner) kindly invited us along to view his and talk through the options.

We can not thank Mr and Mrs Forster enough for their amazing hospitality. One of the nicest gentleman you could care to meet and his knowledge and passion for Jensens is an absolute credit to the Jensen brand. it was lovely to see his convertible and to discuss the options with him and we have walked away from the day almost certain that we will look to create the next 541 convertible.

Day 1 of our 3 day trip: 1977 Ford Escort RS2000

Day 1 of our 3 day trip and it was a good start as we made our way up the M6, to Chorley, to view a lovely 1977 Ford Escort RS2000.

Our intention was to view 3 x RS2000’s during our trip. Working on behalf of our client, our objective was to source a good example within a budget. We were not looking for a show winning car and if work was required then this was also acceptable providing it stayed within the budget.

We had had several talks with the owner of our 1977 Ford Escort RS2000 and we were quietly confident that this was not going to let us down and it sure didn’t.

Yes, the paintwork could be improved in places and the original interior needed a little tidying but this car is an absolute stunner.

A successful first visit meant we did not need to view the other 2 vehicles. Now on to our hotel for the evening.

This trip brought back some great memories as we settled in to the Shaw Hill Golf and Spa Hotel for the evening. many years ago Gordon and Craig lived just 500 yards away from this hotel and Craig frequented the gym facilities there on a regular basis. We couldn’t help but visit our old home to look back at the fond memories.

Shaw Hill Golf and Spa Hotel is set in a beautiful location near Chorley in Lancashire, offering unrivalled Leisure Breaks, Golf Breaks, Weddings, Conference and Meeting Room facilities. This glorious stone mansion was built circa 1700 by the Crosse family and amazingly is still a family run business.