1956 Jensen 541

Workshop Walkaround – A Few Projects

With the team here at Bridge Classic Cars always working on something, whether that be the restorations technicians in the various departments, the marketing team or the leadership teams, we are all focused around our incredible workshop. We’re all incredibly lucky to be able to be surrounded by these cars on a daily basis and […]

Suspension, Glovebox, And More

Both Paul and Lydia have been working on our 1956 Jensen 541. Once Paul had changed over the rear suspension leaf springs to the correct ones, he carried on fitting the door trim. Lydia then made a glove box for our classic Jensen. It’s small in size as it has to fit into the dash […]

Seat Runners

As our 1956 Jensen 541 continues to make good progress through its restoration journey here at Bridge Classic Cars, Paul has been assembling the seat runners and drilling the mounting holes for these. The seat belt mounts have been fitted to the gearbox tunnel and the work has begun on fitting the door trim and […]

541 Rebuild Progress

Paul has continued rebuilding our 1956 Jensen 541. He has modified the clutch and started making the mounts for the seat belts. Paul then went on to fit the wiper motor before finishing fitting the seat belts. He has also started fabricating new seat runner mounts ready to be welded in place.

More Rebuilding

Paul has continued rebuilding our 1956 Jensen 541. He has: He also made and fitted the brake pipes to the servo, repaired the exhaust manifolds ready for coating, checked and balanced the carb mixture screws, replaced the bulkhead heat shield, made and fitted the king lead, and carried on with the electrics.

A New Shade – The 1956 Jensen 541 Gets New Wheels

With our 1956 Jensen 541 project moving quickly now, the team have had a chance to try out some new ideas for the car. One of which being the cars wheel colour. This 541 is going to be fitted with wire wheels and to change things slightly, the team have opted for the dark red […]

More Jensen Progress

The heat shield on our 1956 Jensen 541 has been finished and the throttle pedal has been fitted. The vacuum valve and heater pipes were also fitted. Paul removed the handbrake mounts before painting and refitting them. Paul made a finishing strip for the rear shelf of our 541 to hide some holes where the […]

Sound Deadening And Brakes

Lydia recently covered the gearbox tunnel of our 1956 Jensen 541 with sound-deadening material. Paul has also made and fitted the brake pipes from the master cylinder to the main pipe connector. Paul then went on to build up the engine bay ready for the engine and gearbox. He also fabricated the rear brake wheel […]

More Paint And Wiring

Chris has applied dtm gloss to various components of our 1956 Jensen 541. While he was doing this, Paul finished wiring the loom into the dashboard and fabricated a gearbox mount. He then went on to fit the floor boards and fuel line before cleaning the gearbox tunnel ready for repair. Once this was done, […]

Lots Of Work Complete

Our 1956 Jensen 541 has made a lot of progress recently. Paul has finished the dash mounts and has started work on the wiring. After fitting the loom, he began work wiring some of the electrical components into it. The headlining has been fitted on our 541 too. Lydia made it from a cream vinyl […]

Repairs And Modifications

Classic car technician Paul has been working on our 1956 Jensen 541. He fitted the heater box and fabricated various parts before fitting the handbrake cable and welding the bracket in place. He then modified the chassis to enable the fitting of the wiring loom.

Brakes And Axle Supports

Classic car technician Paul has manufactured brake pipes for our 1956 Jensen 541. After fitting these to the car, he then fabricated axle support straps ready for them to be painted.

541 Progress

Paul has been working on our 1956 Jensen 541. He made and fitted the fuel tank before fabricating parts for the driver’s side footwell and welding these in place.

Rebuilding Continues

Classic car technician Paul has been continuing the process of rebuilding our 1956 Jensen 541. He has fitted several more components as well as fabricated steering box mounts and the pedal box.

Steering rack bracket

Monty has made up a new steering rack bracket to replace the existing one on our 1956 Jensen 541.

Better than new – Retrimming the dash panels on our 1956 Jensen 541

Brian has been hard at work in the Bridge Classic Cars in-house trim shop working on getting the various interior trim pieces and panelwork done on our 1956 Jensen 541. He took the original dash panel section and after removing the old covering, sanded the piece down to remove any residue or adhesive which may […]

Jensen Front Suspension

Classic car technician Paul has been working on the front suspension of our 1956 Jensen 541. After removing the worn bearings, new parts were fitted. The components that make up the suspension were then checked and cleaned ready to be assembled. Paul then put the front suspension and brakes back together.

More Paint Work For Our 541

Our 1956 Jensen 541 has continued its stay in the Bridge Classic Cars paint shop as classic car technicians Chris, Al, and Mauro have been finishing off the painting of the body and other components. Mauro has been painting various engine bay components black, while Chris spent some time polishing the newly painted body.

A New Coat Of Paint

Some good progress has been made on our 1956 Jensen 541 recently. After being prepped and primed, the body and various components have been painted. As you can see from the images below, the new colour looks great and was the perfect choice from the owner of this classic car. While Chris was painting our […]

Priming A Jensen

Our 1956 Jensen 541 has had the fibreglass on the inside and exterior of the roof completed. The body of the car had its coating of epoxy primer while the back of the doors were prepped ready to be fitted up too. It’s always good to see progress like this being made and it will […]

Good As New

Our friends at Wyatt Polishing recently completed some restoration work and zinc plating for a number of seat runners and bonnet struts for the Jensens currently in the Bridge Classic Cars workshop. When components like this look as good as they now do, you can tell that the fully restored cars they become a part […]

Bonnet Panel Levelled

The bonnet of our 1956 Jensen 541 has been panel levelled by classic car technician Al. Once that had been completed, the bonnet was ready for polyester primer to be applied as it moved on to the next stage of its restoration journey in the Bridge Classic Cars workshop.

Inner Arches

Classic car technician Al has been working on our 1956 Jensen 541 lately. Recently, he has been focused on continuing the painting of the chassis and its numerous components. As well as painting the rear inner arches of this soon-to-be beautiful classic car, Al also painted the door frames too. Work will continue on our […]

Chassis Painted

Since returning from the sandblasters, the chassis of our 1956 Jensen 541 has spent some time in our paint shop being painted. It’s not very often that you see the chassis of a car in this state so it’s always interesting to see this stage of restoration work.

Epoxy Primer For Our 1956 Jensen 541

Classic car technician Alan has been doing more work on our 1956 Jensen 541. After repairing the roof and bonnet of this classic car, Alan turned his attention to the doors. He removed the door skins from the frames so he could apply epoxy primer to both sides. Epoxy primer was also applied to the […]

More Fibreglass Work

Classic car technician Alan has once again been repairing and replacing parts of the fibreglass body of our 1956 Jensen 541. He ground back the cracks in the bonnet before covering it in a new sheet of fibreglass. In addition to this, Alan also reinforced all the bonnet supports as they were weak and loose. […]

Jensen Bonnet Strips

Our classic car technician, Clinton, has been making parts that will ultimately go on to be fitted into one of our ongoing Jensen projects. The bonnet strips he made can be seen in the photos below.

Repairing A Hole In The Bonnet

Not only has classic car technician Alan been busy repairing the fibreglass roof of our 1956 Jensen 541, but he has also been repairing a hole in the bonnet too. He repaired the inside first by attaching some meshing which would provide more support for the repair. Once the inside of the hole was sealed, […]

A Very Special Roof

The history of the Jensen 541 is an interesting story that goes all the way back to 1953. Before the release of the 541, Jensen Motors predominantly used aluminium to make the bodywork of their Interceptors. Interestingly, the boot lid of the Jensen Interceptor though was made from fibreglass. Fibreglass was not commonly used in […]

A Brief History Of The Jensen 541

The Jensen 541 was a car produced by Jensen Motors. Each one of these cars has an individual story to tell, but the story of the Jensen 541, in general, is one that many car enthusiasts should be keen to hear. If you want to know more about these truly iconic classic cars, then this […]