A New Seat Cover
October 18, 2023
Interior trimmer Lydia has been making a new seat cover for our 1967 Suzuki TR 250. Before making the seat cover properly from Alcantara, Lydia
October 18, 2023
Next Steps
October 18, 2023
Classic car technician James has been working on our 1972 Ford Transit Tipper. Since leaving the Bridge Classic Cars paintshop, it is now in the
A New Seat Cover
October 18, 2023
Interior trimmer Lydia has been making a new seat cover for our 1967 Suzuki TR 250.
Before making the seat cover properly from Alcantara, Lydia made a mockup to ensure her idea would work. She used a piece of scrap fabric to work out the shape and add all the fixings she needed, and this also gave her the time to work out the fluted design for the topmost seat.
Once Lydia had completed the base part of the seat, she moved to the back. The backrest needed to be fixed to the seat, so she drilled some holes to allow her to bolt the backrest onto the seat. She then attached the foam padding, which is quite thin to allow maximum rider seat space.
Lydia fixed the backrest cover to the wood and added decorative piping to the edge. This helps to close up the gap between the fibreglass seat and the material. Next, she checked that the front flap lifted as it should to allow access to the bolts underneath. These are so you can attach it to the motorcycle as and when needed.
Next Steps
October 18, 2023
Classic car technician James has been working on our 1972 Ford Transit Tipper. Since leaving the Bridge Classic Cars paintshop, it is now in the main workshop where the next phase of its restoration will take place.
James repaired the wiring to the rear chassis earth, replaced the unsafe and incorrect fuel hoses under the bonnet, and replaced the split vacuum pipework from the carb to the distributor.
He also tightened the fixings for the bottom front panel and replaced one missing bolt. Our classic Ford Transit Tipper was then checked for oil leaks, and James noticed that the output shaft seal at the rear of the gearbox/propshaft was misaligned and leaking.
The overflow pipe to the top of the radiator was also repaired and re-secured.
