The Deluxe’ Last Day

It’s our gorgeous 1961 Morris Mini Deluxe’ last day with us today. We have a load of work to do before tomorrow night, where she will be presented as a birthday gift to Eva Ranson, wife of our Director; Gordon Ranson.

The Mini arrived at our Pettistree workshop this morning looking pretty bare! Although her engine was in, she still needed all her interior fitted, including carpets, door panels and seats.

Firstly, one of our engine technicians Ted completed some final tweaks to the Mini’s 800cc engine. The engines already been totally recommissioned, as well as stripped and repainted in that lovely green you can see in the picture.

Meanwhile, Brian in the trim shop is getting the first section of the headlining in. He’s then got the front lining in and has fitted the C Posts.

The front dash was then fitted with it’s fleck material. “I trimmed around the edge” explains Kath, another of our trim-shop experts. “Then, I’ve glued it all in place.”

Kath’s then fitted the upper section of the dash, she’s then bent it round and trimmed it to fit. “I then glued the ends around the door seal” she tells us “then reattached the door seal.”

The door panels were next on the list. They were tricky! Kath had to trim the board and cut some foam out along the side to be able to slide it in. She then inserted the little door fillet panels.

The rear door panel pockets were equally difficult. “The boards didn’t fit” Kath explains “so we had to trim down to get them to fit inside nicely.”

Kath then had to trim holes for the ashtrays – a fixture you never see anymore in modern cars!

She trimmed the holes for the lights and fitted them in place. Getting the rivet bracket into position then fitting the rest of the board.

The sun visors were the next feature to be fitted. First of all the brackets were screwed into place, then the custom made visors were attached.

All the underlay and carpet was yet to be fitted when our Mini arrived back with us this morning. Underlay was trimmed up and glued into position. Matching red carpet was then fitted under where the seats will go. Taking care to trim around the seat brackets where each of the front seats will go.

The final sections of carpet were then fitted into place, trimmed up and glued to hold their position.

The seats were then fitted into the front. Looking lovely!

Brian then added sound deadening to the back seat section, before attaching his custom-made back seat. He also added the rear squab and the parcel shelf behind it.

“I’ve then fitted the rear quarter panels” Brian explains “securing them with screws at the top”. Brian’s also glued the wheel arch covers into position.

Aside from the interior, the Mini’s working components also had to be reassembled. These parts arrived back with us this morning as individual bits. The team have spent the day reassembling the subframe, ready to get the wheels back on and get her back up and running!

My goodness! What a team effort to get our gorgeous little Mini ready for her big reveal. We hope Eva loves her ‘Little Eva’ as much as we do!

Happy Birthday!