May 26, 2020

1960 AC Aceca – Day 1 Clean

Day 1 of our 1960 AC Aceca barn find clean. After 35 years in storage the owner has decided it’s time to get a full assessment carried out on the car with a view of either restoring or recommissioning.

We have started on day 1 by detailing the engine bay as best we car. The car will undergo a full 2 day detail to reveal all of it’s imperfection and show us and the owner exactly what extent we will need to go to on the car.

Here’s a little before and after!

Before:

After:

Arriving this week: 1994 TVR Chimaera V8

Arriving in our workshops later this week we are so excited to welcome our 1994 TVR Chimaera 5 litre with a seriously impressive history of works carried out. Grab yourself a cup of tea and sit back to read all about it…

1994 TVR Chimaera in Starlight Blue with Navy and Magnolia interior.

Original TVR V8 engine upgraded and rebuilt to a 5 litre capacity at approximately 71,000 miles in 2011.

Using the V8 Developments modified heads and inlet with 45mm bore trumplets and 72mm throttle inlet.

Megasquirt MS2 ECU controlling fuel and spark.

Ford Gen 2 Coil packs.

Wideband Innovate MTXL AFR sensor, gauge fitted but hidden out of sight.

Smooth bore silicone induction pipes, with KN filter.

Real Steel Viper Typhoon cam.

Baffled sump.

16-row oil cooler.

Clive Ford Y piece, standard centre box exhaust system.

AP Racing clutch fitted at 71,000 miles, to 5 litre TVR specification.

Gearbox rebuilt at 71,000 miles.

New BTR diff fitted in 2017 with new bushes (supplied and fitted by Central TVR)

Gaz Gold suspension.

Front double anti-roll bar, rear anti-roll bar.

Front and rear droplinks replaced.

Electric power steering to Chimaera PAS rack

4 pot Sierra Cosworth calipers and 283mm discs at the front, new Mintex pads in 2018.

Lupo headlight conversion.

New outriggers fitted in 2012.

Classic Car Services new folding hood and Targa panels recovered in 2016 by Classic Car Services.

Refurbished wheels and tyres fitted in 2016.

Wheel alignment and geo check carried out by James Agger Autosport in 2016.

Original alarm replaced to include central locking control and remote boot opening.

A previous owner rebuilt the engine in 2011 converting it from a 4 litre to a 5 litre, using parts from various suppliers including Real Steel and V8 Developments. Also carried out the conversion of the engine from distributor based spark to coil controlled by a Megasquirt ECU which also controls fuel injection. The same owner also carried out a significant amount of work to the mechanical side of the car, including new shocks, uprated anti-roll bar, replacement outriggers, recon gearbox, new clutch and also fitted a pair of newer seats from 98 Chimaera.

A recent visit to the rolling road at Northampton Motorsport as part of a Sporting Bears charity event allowed an opportunity to have a run on the rollers, where it was found to be putting out 280bhp and 305lb/ft torque. The staff from Northampton Motorsport said the power and particularly the torque was pretty good for a 5 litre TVR engine.

It was badged as a TVR Chimaera 500 and is correctly recorded on the V5 logbook as a 5 litre. It has a modified 5 litres TVR (Rover) V8 engine. To avoid any confusion it left the factory as a 400, 4 litre and has been rebuilt and converted to 500 specification.

The roof panels have been recovered during my ownership and the rear folding section replaced. I took the opportunity to change the rear window to a lozenge shape which makes folding the roof much easier and allows the rear section to fold into the car further than the standard roof.

The GKN diff was replaced in 2017, opting for the more expensive option of getting a brand new BTR diff fitted (as fitted to the later Chimaeras in place of the GKN diff) by Central TVR. This is possible with their GKN/BTR chassis conversion plates. The speed sensor and diff bushes were replaced at the same time.

It has 94400 miles on the clock, was first registered in 1994. The previous owner recently fitted a new Exide 640CCA battery, new Mintex pads to the front, replaced the manifold gaskets and changed the oil and filter.

Jensen 541 R Roof Lining

Kath and Brian has done a wonderful job transforming the roof lining of our Jensen 541R. Thereโ€™s a lot of black components on this Jensen specification. The roof lining however is finished now in this sumptuous perforated cream headlining fabric, expertly trimmed by our Trim Shop team. They begun by fitting the restored roof bars into the roof of the car, using the old headlining as a template, it was a challenge to get the fabric to fit perfectly without any creases. This required the fabric to be kept taught from all angles. Itโ€™s now finished and looking wonderful.

1960 MGA Interior Trim

Brian and Kath have continued working on our gorgeous 1960 MGA interior restoration.

Theyโ€™ve glued and fitted the rear wheel arch carpets and fitted the rear bulkhead carpet, making sure to perfectly cut around the gearbox tunnel. 

They then fitted the armrest, cutting around the handbrake lever. The gearstick surround carpet and the gearbox fennel carpet were then fitted. The black is beautifully offset by red piping to match the MGAโ€™s exterior colour. The interior is really starting to come together as this restoration approaches completion.

The wheel arch panels have been fitted while the front door pockets were screwed into place.

The drivers footwell carpet required a 30mm hole for the front driver mat cap. Kath has sewn in a grommet to allow the carpet to be secured to the floor of the car. Itโ€™s in the little details that ensure the overall presentation of this car is excellent.

Moving down the rear of the car the boot is now complete. Kath and Brian made a bespoke great wheel cover and boot board. 

Wonderful work, team!ย 

RS2000 Front Brake Caliper Piston

Our RS2000 returns to the workshops with a couple of issues to address. We have slight movement in the gearbox which needs to be looked at but also something happening down below on heavy braking.

Upon closer inspection, a sudden pop has revealed that the front caliper piston seals have worn away. Once we rebuild the calipers we can get this back on the car and hopefully it’ll be ready to go home.