By Craig Ranson
Scott has been hard at work preparing our Peugeot 504 for Darren and Chris in the paint shop.
Scott has finished repairing the offside reinforcement rail and repaired the rear floor under the rear seat support. To do this Scott has had to cut this and the rear bulkhead open and repair all the rust before welding it all back together.
Scott has also removed the nearside rear axle moiunting in order to drop out the rear axle. Once the rear axle was removed Scott was able to acess the rust on the inner sill.
Then Scott moved onto the rear seat wells and made a small rust reapir to the top of the N/S rear wheel tub.
Finally, Scott drained and removed the petrol tank to repair the inner and outer lower rear valance.
Share this post
Enjoyed this article by Craig Ranson?
