Posts by Craig Ranson

James has been continuing his repair work on the corroded areas of the 1977 Daimler Double Six. The right-hand side front inner wing has been more work than the left-hand side. Keep up the good work James!

Kath has been starting on the carpet for the 1955 Aston Martin DB 2/4 this week. The list of carpet pieces she’s made includes the front tunnel carpet, the rear under-seat carpets, the carpet that goes underneath the front of…

We’ve welcomed back this 1933 maroon Austin 7 into our workshop this week. Paul has been working on it and he’s installed a new brake light switch and new wires for it too. He’s been looking at the front brakes…

Lydia has been continuing her prep work again for the 1998 Honda Integra Type R. This time around she’s been sanding down the primer on the various panel pieces for the wing mirrors and the fuel cap. They were all…

Our two most recent competition winners got united with their cars today. One of them was Andrew Oswold, who won the 1981 Rover 3500 SD1 Vanden Plas. He’s also pictured here with a 1976 Triumph Spitfire 1500, which he also…

We’ve recently been looking at the bumper on our 1973 Rolls Royce Corniche. It had been painted at some time in its life and so wasn’t looking fantastic. We took it to have the paint taken off but unfortunately, the…

You may have read about our recent purchases from yesterday’s blog posts, and here’s another one! This 1958 Triumph TR3, which was in the workshop recently for work, is now in our possession. The car has had a full service…

The 1971 Lotus Elan is now ready to leave our workshop! After a general check over was done on the suspension bushes underneath the car by John, no problems were found. You can read about the engine work that Ady…

Another car which we have recently purchased is this 1976 Mercedes R107 350 SL. With the exterior of the car painted in Aztec Gold and the interior being Chocolate Tex colour, it screams the 1970s. The exterior of the car…

Here’s a car that a lot of people are fond of. Purchased by us today is this 1983 Ford Capri 1.6 LS! The bodywork on this car is fantastic, with no signs of corrosion underneath, the original cloth interior is…

Scott has now finished re-assembling the front axle for the 1979 Arrow Ferrari Daytona. The rear axle was re-assembled last week, which you can see a blog post about here. A blog post showing the front axle’s progress from yesterday…

Lydia has been continuing the prep work on the 1998 Honda Integra Type R. This time she’s been sanding down the original paintwork on the underneath/inside of the panel that goes around the boot of the car. She used 500-grade…

The guys down at Electric Classic Cars have been out on the runway this week testing out the ‘Track’ mode of our Tesla powered Austin Mini 850.

Matt’s been continuing his transformation work on the 1973 Jaguar E-Type Series 3. The outside of the body has now been painted Fern Grey to match the inside! There are photos and a small write-up of the inside and the…

Slight play in the cooling fan of our HMC requires attention. A consideration could be to pack it out with a washer but this wouldn’t be the best outcome. It may do the trick and stop it from wobbling but…

Ady has been continuing his investigation into the engine of the 1971 Lotus Elan. He’s replaced the points condenser and coil and put fresh oil in the car. The underside of the car needs looking at next, where the suspension…

We’re welcoming this 1971 Lotus Elan into the workshop! It’s in here because it doesn’t run, so the engine needs checking over to see where the issue(s) lies. Stay tuned for progress on the matter.

Ady has started investigating this Lotus Elan’s engine after the owner bought it into us because of it not running quite right. He’s found that the tips of the points are black, which is not what they should be, and…

Scott has been getting up to speed on the front axle of the 1979 Arrow Ferrari Daytona. The only tasks left to do on it is that the steering rack needs to be installed, the shocks need to be mounted…

Lydia has continued sanding down the primer on various parts for the 1973 Jaguar E-Type Roadster Series 3. This time it was the gearbox cover, boot hinges and door rubber channels. The gearbox cover had 320 soft grade on the…

After thinking the 1977 Daimler Double Six would only be in and out rather quickly, James has unfortunately discovered layers of more corrosion than expected on the right-hand side, front inner wing and chassis rail/leg. The whole inside of the…

Dave has been working on the 1960 peony red Jensen 541S. He’s adjusted the cover for the gearbox so it can come apart for an easier inspection. Bolts have been fitted so it’s fixed in securely but also has a…

Our 1978 bronze Lancia has recently been getting some TLC. This car is an upcoming competition car and is being serviced just like all the other competition cars, to make sure it’s in good condition before it heads to a…

Source: Classic Cars and Campers Fantastic article from our friends at Classic Cars and Campers; ‘Can E-Fuel Rescue Classic Cars?’ Many classic car owners are on tenterhooks with news that the government is moving towards mass electrification of cars, intending to…

We’ve added a splash of colour to our Beverly Hills 1973 Jaguar E-Type roadster. Having arrived over from the US in an Old English White with maroon stripes, the new colour can now be seen for the first time on…

Love it or hate it, it’s clear to see the electric car is here to stay. Guy Martin, a renowned lover of petrol-guzzling engines, is dipping his toes into the classic car world in true Guy Martin fashion…by attempting to…

Kath has been fitting the second front base seat cover to its foam and frame for the 1955 Aston Martin DB 2/4. It’s exactly the same process as the other front base, which you can read about here.

Lydia has finished sanding down the primer on the front frame for the 1973 Jaguar E-Type Roadster Series 3. You can read about the process here. The sanding dust has been cleaned off with panel wipe, ready for the frame…

James has been continuing his repair work on the 1986 Daimler Double Six. He’s now finished the left-hand side, which you can read about the process of here. The same work will be carried out on the right-hand side now.

Dave has been working on the 1975 Triumph TR6. He’s installed a new speedo cable and new clips to go on them. On the original, there was a bad earth connection and it appears that the car had been driven…