We’ve recently been contacted by James, who is on a mission to track down his late grandfather’s 1946 Triumph Speed Twin motorbike. This particular bike,
Our 1954 Daimler Conquest has been successfully delivered to its lucky new owner who won this stunning classic through Bridge Classic Cars Competitions.
Jonn has been cleaning up the wiper motor and mounting brackets of our 1987 Mercedes 500SL. He then cleaned and checked the operation of the
Christian has cut out the sill ends, fabricated new ones, and drilled out the panels that were in the way of the rust on the
Here are Jonns notes from his recent work on our 1995 Toyota Celica GT-Four: Carry out full inspection. Start on the floor and move 5o
The carpets are of our 1952 Fiat 1900A are now finished and what a transformation this has made to the car! Here is what Lydia
Here are Jonns notes on the repairs he has been making to our 1979 Ferrari 400 GT: Rebuild door handle and test. Remove striker/ actuator
Christian has been continuing his work on our 1973 Ferrari Dino. He fabricated and started welding in the front valance and removed the heater blowers.
Yesterday, some of the team at Bridge Classic Cars had the pleasure of spending the day at MG Ipswich for an exclusive first look at
We’ve recently been contacted by James, who is on a mission to track down his late grandfather’s 1946 Triumph Speed Twin motorbike. This particular bike, with the registration FDF 110, obviously holds sentimental value for James and his family.
We know that it was sold around 2017, and while the most recent V5 was issued shortly after, it has since proven difficult to trace its current whereabouts.
This bike was one of the first post-war models that symbolised a return to normalcy after the upheaval of World War II. For James, it represents a connection to his grandfather.
We know how much a vehicle can mean to a family, not just as a mode of transport but as a strong connection to memories of yesteryear. That’s why we’re reaching out to our community for help. If anyone has any information on the current owner of FDF 110 or its location, it would be appreciated by James and his family.
At Bridge Classic Cars, we understand the deep connection people have with their vehicles, which is why we created the Nostalgia section on our website. Here, we share stories of special vehicles that have played a significant role in people’s lives. If you’ve got a tale of your own, we’d love to hear from you and help keep those memories alive.
Please, if you have any information on the whereabouts of the 1946 Triumph Speed Twin, please get in touch.
Our 1954 Daimler Conquest has been successfully delivered to its lucky new owner who won this stunning classic through Bridge Classic Cars Competitions.
Jonn has been cleaning up the wiper motor and mounting brackets of our 1987 Mercedes 500SL.
He then cleaned and checked the operation of the fuel pumps and brackets.
Christian has cut out the sill ends, fabricated new ones, and drilled out the panels that were in the way of the rust on the wheel arches on our 2003 Rover 75 Club SE.
Mauro then prepped the car for paint. He pulled the dents out and added some filler. After Mauro cut the wheel arch off, more rust spots were found.
Epoxy primer was then applied to the bonnet and primer was also applied to some of the panels from the car.
Once the dents were smoothed out on the rear bumper, these were also primed.
The boot was also primed.
Here are Jonns notes from his recent work on our 1995 Toyota Celica GT-Four:
Carry out full inspection. Start on the floor and move 5o ramp when available. Strip and fit new stop and tail bulb to offside rear light and strip and fit new number plate bulbs and test, ok. Inflate all tyres and torque wheel uts when inspection finished. Adjust handbrake via shoes. Clean rear diff area. Strip offside front arch liner and gain access to washer pump which is not working. Disconnect multi plug and check with multi meter. With Rob operating switch, check that power supply and earth are present. All ok, requiresnew washerpump. Carry out road test. Car suspension is very firm and “crashy” over rough terrain but can’t find any play or movement at all. Car drives fine on the road. Complete pdi sheet at ge same time, ok.
Strip engine and remove cambelt. Check water pump, ok. Remove idler and tensioner pulleys. Press automatic tensioner body back and fit pin to hold in place. Ready for new belt kit when it arrives.
Fit new cambelt tensioner and idler pulley. And start reassembly.
Finish cambelt and reassemble. Fit old battery from under my bench and modify clamp to secure. Run and test. All ok. Drain washers and fit new pump. Refillmand test. Still jot working. Pump working but pipes blocked. Blow out front pipe and test, ok. Rear headlining wet so drop head lining and found pipe disconnected at washer jet. Reconnect and test. Ok. Refit headlining and carry out road test. All ok. Refit undershields.
The carpets are of our 1952 Fiat 1900A are now finished and what a transformation this has made to the car!
Here is what Lydia had to say about it:
“Before, the car was looking dark, dingy and depressing, and now it has been given a new lease of life with these stunning woollen carpets and mats. The carpet has been lovingly trimmed with a complimentary green edging.
Our 1900A will likely be the envy of Fiat owners everywhere when they lay their eyes on the pea-green masterpiece. Please take note of the fabulous custom stitched heel mat, also made from the complimentary green vinyl, adding a touch of je ne sais quoi to the vehicle.”
Steve also refurbished the hand brake shoes and refitted them as the old ones were contaminated from the leaking differential seal which has also now been replaced.
Here are Jonns notes on the repairs he has been making to our 1979 Ferrari 400 GT:
Rebuild door handle and test. Remove striker/ actuator i made and bend slightly and refit. Seems to be ok but lock stiff and key nearly broken. Stop and wait for new keys to arrive. Investigate passengers seat back insecure. Found inner hook for relaesing seat back been wired 8n open position. Cable inside seat broken. Make small bracket to fit to hook so able to lift manually. Fit and paint black. Coolant leaks. Start with corroded jubilee clips on heater pipe. Remove pipe and found pipe split badly, and connector corroded. Remove connector and clean. Use JB weld chemical metal to repair holes on connector and leave to set. Clean mating surfaces and make gasket for connector.
Strip and remove exhaust system. Cut of rear sections and cut and remove what’s left in rear sections. Re rivet heatshiels to floor both sides. Fit new P clip to secure offside handbrake cable. Fit water connector to rear of head and leave to go off overnight.
Fit coolant hose to heater. Pressurise system and trace leaks. Rad hoses leaking and all jubilee clips corroded and won’t tighten. Remove rad hoses and inline thermostat. Thermostat broken inside housing. Clean all pipe connections. Wash down front of engine waterpump area. Fit new hoses that we had in stock and order new thermostat and hoses we don’t have. Rek9ve offside front wheel and strip and remove brake flexi hoses fro replacement. Fit 2 x new hoses to offside front and secure.
Bleed offside front brake and pressure check for leaks, ok. Top up brake fluid. Refit wheel. Attend to horn not working. Connector missing inside steering wheel. Remove steering wheel and work out way to make it work. Drill out rivet from connector behind steering wheel. Fit wire andfeed through steering wheel. Tighten steering wheel and fit spade terminal to wire and connect to centre push. Fit centre and test, ok.
New keys arrived so refit nearside door handle and test lock with key. Stiff to operate but does work now. Secure handle in door.
Refit door handle fully and lubricate mechanism. Test functions all ok. Refit door panel.
Fit new coolant hoses and secure. Vacuum system and check for loss of vacuum. Fill system with new anti freeze mix. Attend to oil leak. Trace to gearbox cooler pipes fractured. All pipes seized and while attempting to remove direct from cooler, cooler split. Cut off pipes and remove system complete. Remove broken cotton reel mounts.
Christian has been continuing his work on our 1973 Ferrari Dino.
He fabricated and started welding in the front valance and removed the heater blowers.
While he was doing that, Steve cleaned the rubber cups and gaiters from the suspension before putting the springs back on the shock absorbers.
The front end was also repaired.
Yesterday, some of the team at Bridge Classic Cars had the pleasure of spending the day at MG Ipswich for an exclusive first look at the much-anticipated MG Cyberster. The day was a combination of the old and the new, as we joined the celebration of 100 years of MG by having some of our classic MGs in the showroom alongside the Cyberster.
We arrived in our selection of classic cars – our 1955 MG Magnette, 1968 MGC, and 2003 MG ZT V8. These all looked very much at home in the shiny showroom.
Some of our members made the trip to see the Cyberster for themselves. They, like us, were extremely keen to get a look at the car that has been making waves in the automotive world as of late. The event was a fantastic opportunity for us all to share nostalgic stories of classic cars as well as talk about the future of MG and the potential of the Cyberster.
The MG Cyberster is a car that not only looks stunning but also has the potential to change the perception of EVs. I think the best way of describing the Cyberster is by calling it a bold statement from MG. A statement that says they are a brand looking to the future with the understanding of the foundation built on the cars of the past.
Naming the Cyberster completely different to classic MGs, designing it from the ground up, and having subtle nods back to the past looks to make it an EV that looks and feels different to a typical EV.
At first glance, the Cyberster’s design is striking. It’s a low-slung, sleek roadster that immediately conjures up images of MG’s classic roadsters but with a very modern (futuristic?) twist. The aggressive front end, with its sharp LED headlights and aerodynamic lines, gives it a futuristic feel, while the long bonnet and sweeping curves pay homage to MG’s past.
This all-electric roadster is powered by a high-performance battery pack, delivering instant torque and blistering acceleration. The figures are extremely impressive with a 0-60 mph time of under 3 seconds and a top speed that comfortably exceeds 120 mph (GT version). But it’s not just about speed; the Cyberster is designed to be a driver’s car, with responsive steering, a balanced chassis, and a suspension setup that promises to deliver an exciting yet comfortable ride.
So, what’s it like to sit behind the wheel of the MG Cyberster? Even before you start driving, it’s clear that this is a car that’s been designed with the driver in mind. The interior is a blend of high-tech features and luxury materials, with a layout that’s both intuitive and stylish. The digital dashboard is a centrepiece, offering a range of customisable displays that provide everything from navigation to performance data.
The seats are supportive and comfortable and the faux-leather trim adds an extra element of style and luxury to this incredibly fast car. A personal favourite for me is the scissor doors. This seemed to be a big talking point yesterday so I’m looking forward to seeing the reaction of the first round of owners.
The day at MG Ipswich was a huge success, but it was just the beginning. We’re already looking forward to a day in the next few weeks when we’ll be offering test drives of the MG Cyberster. This will be a unique opportunity for our members and guests to experience the car firsthand, and to feel the power and precision that we’ve been raving about.
We’ll be hosting a full-day event, complete with more classic cars, and of course, plenty of chances to get behind the wheel of the Cyberster.
The MG Cyberster is a bold move by MG to embrace the future while honouring its rich heritage. For those of us at Bridge Classic Cars, it’s a reminder that while we keep the past alive, we’re also excited about what the future holds. And if the Cyberster is any indication, that future is bright, fast, and incredibly exciting.
Leave a Reply