Continental Bentley gets a refresh!

One of the recent projects in the trim shop has been to make new seats for a Series 3 Continental Bentley. The old seats were getting a bit tired looking so it was time for a cleaner look!

Lydia was behind taking off the old covers and making the new ones. She started by taking the base seats and removing the old covers off, before moving onto the front squabs and then the rear seats… All were held in place using various methods.

The new base seats were the first to be made. These were a simple construction of a large piece of leather cut to shape with a piped skirt sewn around the sides.

The front squabs were created next. These had an armrest in the side of each one. The “faces” of the front squabs were fluted, with a surrounding piece of leather sewn around it, with piping, and then a piped “skirt” around that. The armrest comprised of a main piece that wrapped around the middle of the armrest form, and then two piped sides. There was a tab that was sewn in and formed the purpose of being able to pull the armrest out of the seat. The back of the front squabs had a backboard, covered in the leather, and then a binded carpet below it.

The rear squab seat was next. This was a similar design to the front squabs, consisting of fluted faces and an armrest in the middle of them. The armrest this time was a large blockish design, which came out on a screwed mechanism. Their was a covered backboard on the top half.

The rear base was the final one to make. This was a similar design to the front bases, comprising of plain design “faces”, with a piped “skirt” wrapped around the sides and sidebands. The other end of the “faces” was French-Seamed.

Once all the new covers were sewn up, it was time for Brian to fit them back on the original frames, using similar methods to the original ones, to attach them. All the seat frames were spring-based and in great usable condition.