1960 MG A Chassis Work Continues
January 10, 2020
Paul has continued work on our 1960 MG A Chassis. Paul is working on the MGA floor panels now. He’s used the old wood to
January 10, 2020
1998 BMW M3 EVO COUPE
January 10, 2020
Arriving back into the Bridge Classic Cars classic car workshop is this fabulous E36 BMW M3. The E36 BMW M3 is a vehicle with one
Morris J Type in the Trim Shop
January 10, 2020
Kath, Bridge Classic Cars’ Trimmer has been working hard on re-trimming the seats on our Morris J type. Kath has removed the old leather and
1944 Morris C8 Engine Rebuild completion
January 10, 2020
Our lovely 1944 Morris C8, or to call her by her real name, Ellen, is now complete. We were tasked with rebuilding the engine on
1960 MG A Chassis Work Continues
January 10, 2020
Paul has continued work on our 1960 MG A Chassis. Paul is working on the MGA floor panels now. He’s used the old wood to measure up a template before fabricating new wooden floor panels. He’s repaired the front chassis section and prepared it for paintwork.
As pictured the rear section of the driveshaft tunnel has severely deteriorated and will wither need repair or replacing.
1998 BMW M3 EVO COUPE
January 10, 2020
Arriving back into the Bridge Classic Cars classic car workshop is this fabulous E36 BMW M3. The E36 BMW M3 is a vehicle with one of the largest cult followings of all.
A true drivers car, this M3 has been untouched for a number of years. As such it is in need of some restorative works to bring this wonderful machine back to its former glory.
Morris J Type in the Trim Shop
January 10, 2020
Kath, Bridge Classic Cars’ Trimmer has been working hard on re-trimming the seats on our Morris J type. Kath has removed the old leather and using the original fabric as a reference, replaced with new material in the same style.
1944 Morris C8 Engine Rebuild completion
January 10, 2020
Our lovely 1944 Morris C8, or to call her by her real name, Ellen, is now complete.
We were tasked with rebuilding the engine on this Morris C8. Most of the work was carried out by Ady, Bridge Classic Cars’ engine specialist.
Firstly, we removed the engine for full assessment. Ady and Pete had found that the big end bearings had deteriorated. The engine was stripped down and cleaned. Under instruction of the customer we stripped down the engine and inspected all components. We found the piston rings were broken and the crankshaft needed grinding. The valve seats had deteriorated so we laped in all the valves.
We fitted new piston rings, new bearings and the head gasket were custom made for this engine. All other gaskets were all hand made for this C8 engine.
All the remianing parts were refurbished or replaced for new, before the engine was re-assembled and taken out for testing. Ellen now runs smoothly and is ready for many more years on the road.
